BUCHLA258 STRIPBOARD
this was just for fun ,there is already a pcb layout for this vco ,haven't built it yet
View ArticleSlope Detector
this a stripboard layout for the slope detector from the CGS site ,it will output separate gates on cv 1.rise 2.steady 3.fall here is the schematic :...
View ArticleMS20 VCF (EFM Version)
Thanks Paradigm X ,Merry Christmas ,i hope i'll build some of it too :)
View ArticleMS-20 (LM-13700 version),Polivoks or EMS VCF on veroboard?
Hi Sebo.enjoy your vacation man.See you soon :)
View ArticleSimple 78xx (Positive)and 79xx (Negative) Power Supply
Yes if you pull a large current, say you wanted to use > 200mA on each rail, I definitely would. I mentioned that under 'Parts Overlay', where if you did do this you would probably also need to run...
View ArticleARP Axxe VCO
Bought some J112 FETs on eBay, and received them this week. It does seem to make some difference in the shape of the square wave.Both outputs are now about 2v p-p, but the squarewave output still has a...
View ArticlePCB design - how do I get to the next level?
Check out the solution that Fonik used for this:http://electro-music.com/forum/viewtopic.php?t=55470 Thanks! That was a big help. Nice way to avoid cables. I managed to find the sockets at mouser. Now...
View ArticleHexinverter´s Battery Acid layout
have been working today on hexinverters battery acidanyone see any faults? http://cv.hexinverter.net/?projects=batteryacid-v10 https://dl.dropbox.com/u/15996745/da/WXP_driver/eagle.rar
View ArticleBuchla 194 Stripboard
A lot of the Buchla schematics are rumored to have (possibly deliberate) errors in them. But I'd say if you were able to breadboard it and have it work.....
View ArticleAniModule Voltage Controlled Scanner/Switch
Hey guys. I just got this all uploaded on my site Voltage Controlled Scanner/Switch at AniModule.com I posted the: schematics TopPlace BottomPlace (there's a few SMD Components. The caps and resistors...
View ArticleSeeking 1.2v/oct to 1v/oct AND 1v to 1.2v circuit
You could use an 82K and a 20k or 25k trimmer to deal with that. I'll check that. Thanx!
View ArticleSEM Type VCF
SEM Type VCF as in Wildcat by EFM ,it's the same ,the only difference is the 10K resistor going from the collector of the exponential converter into the LM13700 ,as in 4600 version here :...
View ArticleJH Living VCO stripboard
If you have a HFA3046 SOIC 14 package - http://www.intersil.com/content/dam/Intersil/documents/fn30/fn3076.pdf , use a little piece of striboard 0.5x0.5 inch - 12.7x12.7 mm to adapt the HFA3046 SOIC 14...
View Article4017 Baby Sequencer Stripboard
Ive done a pcb that's basicaly a breakout for the pins on the 4017 mostly to get the connections in order to make it easier to troubleshoot when panelmounting so i'll give a writeup omorrow how my...
View Articlediy-layout-creator
By far the easiest stripboard layout editor i've found :) and i tend to design most of my pcbs with it aswell :)
View ArticleCraig Anderton Hip Bass Drum PCB
Any chance of getting this to work with a resistor voltage divider. Iam really not fond of +/- voltage personally i feel if the circuit can work with just positive voltage it should be designed that...
View ArticleWho can help to make a stripboard layout? Buffered Multiple
at muffs is a simmilar treat now. i hope its ok to share it on both forums.http://www.muffwiggler.com/forum/viewtopic.php?t=21611&postdays=0&postorder=asc&start=0
View ArticleARP Odyssey MKII/III VCO - Eurorack Format
I've also noticed you have the spare NAND inputs floating i.e. not connected to anything (pins 1, 2, 12 & 13), CMOS doesn't like floating inputs, so it's best to solder those 4 pins to +V. It's...
View Article